Lantronix XPort Integration Manual - Technical Specifications
2 Description and Specifications
XPort™ Integration Guide
13
Technical Specifications
Table 2-6 Technical Specification
Category
Description
CPU, Memory
Lantronix DSTni-EX 186 CPU, 256-Kbyte zero wait state SRAM, 512-Kbyte flash,
16-Kbyte boot ROM
Firmware
Upgradeable via TFTP and serial port
Reset Circuit
Internal 200ms power-up reset pulse. Power-drop reset triggered at 2.6V. External
reset input causes an internal 200ms reset.
Serial Interface
CMOS (Asynchronous) 3.3V-level signals
Rate is software selectable:
300 bps to 921600 bps
Serial Line Formats
Data bits: 7 or 8
Stop bits: 1 or 2
Parity: odd, even, none
Modem Control
DTR/DCD, CTS, RTS
Flow Control
XON/XOFF (software), CTS/RTS (hardware), None
Programmable I/O
3 PIO pins (software selectable), sink or source 4mA max.
Network Interface
RJ45 Ethernet 10Base-T or 100Base-TX (auto-sensing)
Compatibility
Ethernet: Version 2.0/IEEE 802.3 (electrical), Ethernet II frame type
Protocols Supported
ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP,
SMTP, and HTTP
LEDs
10Base-T and 100Base-TX Link Activity, Full/half duplex. Software generated
status & diagnostic signals can optionally drive external LEDs through CP1 & CP3.
Management
Internal web server, SNMP (read only)
Serial login, Telnet login
Security
Password protection, locking features, optional Rijndael 256-bit encryption
Internal Web Server
Serves static web pages and Java applets
Storage capacity: 384 Kbytes
Weight
0.34 oz (9.6 grams)
Material
Metal shell, thermoplastic case
Temperature
Operating range:
-40°C to +85°C (-40°F to 185°F) normal mode,
-40°C to +75°C (-40°F to 167°F) high-performance mo
d
e
Shock/Vibration
Non-operational shock: 500 g's
Non-operational vibration: 20 g's
Warranty
Two year limited warranty
Included Software
Windows™ 98/NT/2000/XP-based Device Installer configuration software and
Windows™-based Com Port Redirector
EMI Compliance
Radiated and conducted emissions - complies with Class B limits of EN
55022:1998
Direct & Indirect ESD - complies with EN55024:1998
RF Electromagnetic Field Immunity - complies with EN55024:1998
Electrical Fast Transient/Burst Immunity - complies with EN55024:1998
Power Frequency Magnetic Field Immunity - complies with EN55024:1998
RF Common Mode Conducted Susceptibility - complies with EN55024:1998