Lawn Solutions TR2009HOF1 Operator's Manual - page 8
Recoil Starter
Pull the recoil starter handle to start engine (Figure 6).
Fuel Shut-off Valve
Close the fuel shut-off valve when transporting or
storing the machine (Figure 6).
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke to
keep the engine running smoothly. As soon as possible,
move the choke lever all the way rearward.
Note: A warm engine requires little or no choking.
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Engine On/Off Switch
Turn to On to enable the electrical system and to Off to
disable the electrical system.
Traction Control Lever
The traction control lever controls the forward, reverse,
and neutral actions of the machine.
•
To move forward, press the control lever forward
(Figure 7). The further forward you push it, the
faster the machine will travel.
•
To move in reverse, pull the control lever rearward
(Figure 7). The further rearward you pull it, the
faster the machine will travel.
•
To turn the machine, move slowly and press down
on the handles; turn the machine in the desired
direction then resume normal operation.
•
To stop, release the control lever (Figure 7).
1
2
3
G016885
Figure 7
1.
Forward
3.
Reverse
2.
Neutral
Cutting Blade Control Lever
Hold the cutting blade control lever down to the handle
to start the cutting blades. Release the lever to stop the
cutting blades.
G016886
1
2
Figure 8
1.
Cutting blade control
lever—disengaged
2.
Cutting blade control
lever—engaged
Depth Control Lever
The depth control lever allows you to set the depth of
the cutting blades in 1/4 inch (6 mm) increments. To
adjust the depth, pull the locking knob out and move the
8