Multi-function memory telephone with headset & on hook dialling instruction manual please read this manual before using this unit leader 726hs.
Important safety instructions when using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on ...
Important safety instructions continued... 10. Unplug this product from the wall outlet and refer: a. When the line cord is damaged or modular plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not op...
Features and functions 1. Base unit 2. On hook dial/headset button - press tc initiate the on-hook dialling or headset (when headset had been plugged into the modular jack, it will be changed to headset mode automatically) operation. 3.Ln-use indicator - lights up to indicate the on-hook dialling or...
Packing list 1 handset and 1 base unit 1 coiled handset cord 1 plastic wall mounting bracket 1 user’s manual (read carefully and save) 1 3m line cord mod to mod 1 p608m plug 7 inches line cord mod to mod installation precautions 1. Never install telephone wiring during a lightning storm. 2. Never in...
3. Battery compartment: batteries are not required. Memory retention is permanent when connected to the line. When disconnected memory retention is 30 minutes. 4. For desktop use: your phone can be placed on a desk or table just like any regular telephone. 5. For wall-mount use (over standard usoc r...
Operating instructions 1. Automatic gain control switch. Ensure switch is on position p to suppress any high gain transmit and receive or echo which can be experienced with some pabx or exchanges. 2. Use the on-hook dialling. Press on hook dial button to initiate on-hook dialling (in-use indicator w...
To store a number, lift handset off hook and press store to begin storing operation, followed by pressing the phone number desired (this number won’t be dialled). End storing sequence by pressing store again, following by the memory location you wish to store the number. Example 1: to store phone nu...
10. Headset operation. These instructions are to be used in addition to the instruction book and on the assumption the handset is already connected, ready to use. (1) connect the telephone headset by plugging into the socket on the right hand side of the telephone. If the handset is being used and t...
If you have problems if your telephone does not work properly, go through the following check list before you spend unnecessary time and money for repairs. 1. Is your telephone connected properly? Make sure all plugs are connected properly. Inspect the line cord connections at the wall jack and the ...
Specifications redial memory capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 digits (tone dialling) memories capacity (10 direct + 10 indirect) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
