Leader 726HS Instruction Manual - page 9
To store a number, lift handset off hook and press STORE
to begin storing operation, followed by pressing the phone
number desired (this number won’t be dialled). End storing
sequence by pressing STORE again, following by the
memory location you wish to store the number.
Example
1: To
store phone number 644-6111 in the #3
one-touch memory, lift handset and press
the following buttons.
Example
2: To store phone number 02-844-6123 in the
#2 two-touch memory, lift handset and press
the following buttons.
#2 memory button
Example
3: If your phone is connected to a PABX in the
office which requires dialling 0 to access
outside line, you can store a phone number
844-6111 in the #3 one-touch memory.
Press the following buttons:
#3 memory button
Example
4: If your phone is connected to a PABX in
the office which requires dialling 0 to access
outside line, you can store a phone number
02-844-6123 in the #2 two-touch memory.
Press the following buttons.
9. Dial a Stored Number.
First identify which memory
location (one-touch or two-touch) has the number you
wish to call. Pick up handset and listen for dial tone. To
dial from a one-touch memory, press the memory button
directly. To dial from a two-touch memory, press SHIFT
first, and then press the memory button. Stored number
is then automatically dallied.
Example
5: To dial the stored number 644-6111 from
Example 1 above, pick up handset, listen for dial tone,
and then press #3 memory button directly.
Example
6: To dial the stored number 02-844-6123 in
Example 2 above, lift handset and listen for dial tone, and
then press SHIFT, followed by pressing the
memory
button.
9