Leader 726HS Instruction Manual - If You Have Problems
IF YOU HAVE PROBLEMS
If your telephone does not work properly, go through the
following check list before you spend unnecessary time and
money for repairs.
1.
Is your telephone connected properly?
Make sure all plugs are connected properly. Inspect the
line cord connections at the wall jack and the telephone.
Also inspect the coiled handset cord connections at both
ends.
Try unplugging the telephone and connecting to another
Telephone wall socket. If it still does not work, try another
telephone. If both telephones don’t work, the problem may
be caused by the telephone network or the wiring in your
home.
2. Is the ringer switch set properly?
If there are several other telephones on the same phone
line, try disconnecting some of the other telephones.
Having too many telephones connected can cause
problems such as low ringing volume, or impaired sound
quality during calls.
3. If the telephone’s volume level drops, or it begins to make
strange sounds, or does not dial out even though a dial
tone is heard,
check to see if other phones have been
picked up on the same line.
Your telephone may not
operate properly when other phones are active on the
same line (especially in areas with low telephone voltage).
Hang up the other phones to correct the problem.
If you still have problems:
Disconnect the phone
immediately. If other phones on the same line function
properly, the problem is in the phone or its installation.
11