Leadtek WinFast 6300MAX/MA Pro User Manual - 5. Software
Leadtek Research Inc.
22
5. Software
Setup
5.1 Windows
95/98
Install Display Driver
Step 1: Insert the “WinFast Mainboard & SCSI Software Pack” CD into the CD-ROM drive.
Step 2: The “Autorun” will be automatically executed and the “WinFast-6300 Setup”
window will appear on screen with selectable menus.
Step 3: Select and click “Install VGA Driver (For Windows9X Users)” menu, then follow the
on-screen instruction choosing “Typical”
setup type to install the driver automatically.
Step 4: Restart Windows.
Display Modes
When drivers were installed properly, click the mouse
right button on Win95/98 desktop wallpaper area and
select “Properties” menu. A window with a title name
“Display Properties” will appear on the screen. Click
the “Setting” tab and then click the “Advanced…”
button. The “WinFast 6300MAX Properties” sheet will
be shown on the screen. From the “Display Modes”
tab, you may select desired resolution by changing
“Desktop area”, desired color by changing “Color”
value, desired font size by changing “Font size”, and
desired refresh rate by changing “Refresh rate”.
Different brands of monitors support different types of
refresh rates. Before you change the current refresh
rate to a new one, a message appears on the screen,
indicating that it will take a few seconds to adjust your
display settings. If the Windows does not reappear
correctly, wait 15 seconds, and your original setting
will be restored.
Click on the “OK” button, the Windows appears with
two configurations: (1) If the monitor supports the
adjusted refresh rate, a message will be shown on the
screen. Click “Yes” within 15 seconds to keep the
new setting. (2) If the monitor does not support the
adjusted refresh rate, the screen will go blank and the
Windows will restore your original refresh rate after 10
seconds.
Advanced Setting for Display Modes
setting item> Once you installed the WinFast ADIMM-DCT optional add-on cards, the “Advanced...” tab will be enabled in the “Display Modes” window. Click “Advanced...” tab to pop up the “Advanced Setting” window: Select “Multimonitor” in the “Driver mode” tab. The “Secondary display device” will then be available to choose among Auto, VGA, TV, and LCD devices.