Leadtek WinFast 6300MAX/MA Pro User Manual - page 29
WinFast 6300MAX/MA Pro User’s Manual
25
5.2
Windows NT 4.0
5.2.1 Install Windows NT 4.0 with the SiS630 onboard
Install Windows NT 4.0 in the usual way. When the installation is completed, Windows NT
4.0 will be booted on the VGA mode as it did not recognize the SiS630 during installation.
NOTE:
Before installing the Windows NT 4.0 driver, make sure the Windows NT 4.0
version number is Windows NT 4.00.1381 or later. If your system is an older version, it is
recommended that you upgrade the version to the latest one.
5.2.2 Install Display Driver
Step 1: Reboot the system and select “Windows NT 4.0 (VGA)” from the Boot Menu List.
Step 2: Insert the “WinFast Mainboard & SCSI Software Pack CD” into the CD-ROM drive.
From your Windows NT 4.0 desktop wallpaper area, click right mouse button and
select the “Properties” option. (or double click “Display” icon in control panel)
Step 3: From the “Display Properties” window, select the “Display Type” button where a
window of “Display Type” appears on your screen.
Step 4: Select the “Change” button in the “Adapter Type” section, a window with a title
name of “Change Display” will appear on your screen.
Step 5: Select “Have Disk” button; The “Install From Disk” window will appear on the screen.
Step 6: Specify the path X:\63008300\VGA\winnt40 (X means CD-ROM drive name) and
select the “OK” button in the “Install From Disk” window; a window with a title name
of “Third Party Drivers” will then appear on your screen, select the “Yes” button.
Step 7: Click “OK” button after the installation completed. Select the “Close” button in the
“Display Type” window. Select the “Close” button in the “Display Properties” window.
Step 8: Click “Yes” button to restart the Windows NT 4.0.
Step 9: When the system is rebooted, select “Windows NT4.0” from the Boot Menu List. After
logon Windows NT, the “Invalid Display Setting” applet will appear on your screen.
NOTE:
This window only appears when using a new display driver for the first time.
Step 10: Choose the Resolution, Color Palette, Refresh Rate and Font Size you desire. You
can use the “TEST” button to verify whether the monitor can support the specified
function or not.
Step 11: Press the “OK” button to change display mode to the specified resolution, color
palette, refresh rate and font size.
5.3
Install Audio Driver for Windows 95/98
Step 1: Insert the “WinFast Mainboard & SCSI Software Pack CD” into the CD-ROM drive.
Step 2: The “Autorun” will be automatically executed, and “WinFast-6300 Setup” window
will appear on screen with selectable menus.
Step 3: Select and click “Install Audio Driver (For Windows9X Users)”. You will see a popup
menu showing “For Windows 95/98”. Select the desired operating system and click.
Step 4: Select “Upgrade” and desired language. Windows will automatically copy files from
CD to your hard drive. These are necessary files for installation of audio drivers to
your system. After finishing copying files, click “Yes” to restart your computer.
Step 5: A dialog of “Found New Hardware (PCI Audio Drive)” will be shown on the screen.
Keep clicking the “Next” buttons that follows, the Windows will automatically install
the audio drivers onto your system.
5.4
Install Ethernet Driver for Windows 95/98/NT 4.0
Step 1: Insert the “WinFast Mainboard & SCSI Software Pack CD” into the CD-ROM drive.
Step 2: The “Autorun” will be automatically executed and “WinFast-6300 Setup” window
will appear on screen with selectable menus.
Step 3: Select and click “Install LAN Driver”. You will see a popup menu showing “For Windows
95/98” and “For Windows NT 4.0”. Select the desired operating system and click.