MA Lighting dot2 XL-F User Manual - page 171
© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
If you already have selected group five you can do this to add fixture two to your selection:
+
2
Please
Assigning values
The
+
key can be used to assign a value higher than the current value - Remember, you can't go above 100% on
the dimmer.
E.g. you have a selection of fixtures at a dimmer value of 50% and you want to raise it 20%. Here's what you type
(you have already selected the fixtures):
At
+
2
0
Please
That would do the trick.
There's a little extra function to the
+
key. If you press it twice it automatically adds 10% to the value. So you
could have archived the same by pressing the
+
key four times.
Absolute value or relative value
The description above is about setting a relative value. You can also set an absolute positive value.
The difference between a relative or absolute value is a space between the plus sign and the number.
To set a relative value you could write in the command line
at + 5
(execute command by pressing
Please
). An
absolute value would be written
at +5
(execute command by pressing
Please
).
The positive value is usually implied unless you specify differently - so you just need to type
at 5
Please
.
Using keys you can just press
At
5
Please
. If you for some reason need to add the plus the you can press
At
+
(hold it while you type the value)
5
Please
, Holding the plus while typing the value removes the space
between the sign and the value.
Both will set the value at positive 5.
Using the calculator (you can get this by a short tap on the encoder for the value you want to set) you can tap
the +/- button to add the sign without a space. For relative values you can use the + button.
Page selection
You can use the
+
key to change the active page. If you want to go to the next page you can use the following
keys:
Page
+
Please
You can also use calculations. If you are on page two and want to go to page five you could use the following keys:
Page
+
3
Please
Related links
171