MA Lighting dot2 XL-F User Manual - page 396
© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
The connection from the preset to the cue will be lost and the values from the preset will be directly stored in the
cues.
Example 4
Let´s assume, you will unpatch fixture 1 from the DMX universe.
Press
Delete
and tap on fixture 1 in the fixtures view.
The console asks to confirm the unpatch process.
Tap OK .
Fixture 1 is unpatched.
Double check the patched fixtures in the
.
8.16. Dmx Command
This page describes the syntax and how to use the
Dmx command.
To go to the Dmx command, press
DMX
on the console.
Dmx is in the
.
Description
With the Dmx command you can:
Make a DMX test.
Turn off the DMX tester.
Select a fixture on a DMX address.
Patch fixture to a DMX address.
Unpatch fixtures from a DMX address.
Syntax
1. Make a DMX test.
DMX 1.7 At 100
2. Turn off the DMX tester.
Off DMX Thru
3. Select a fixture on a DMX address.
396