MA Lighting dot2 XL-F User Manual - page 176
© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
6.59. Speed key
The
Speed
key allows you to set the running speed in chasers and effects. To learn more about Chasers, please
have a look at
and
.
Pressing the
Speed
key gives you the
If you have a Chaser or an effect, then you can press and hold the
Speed
key while you tap any of the keys
associated with the Executor whit the Chaser. This will set the chasers running speed to the BPM of your taps.
Speed masters
The Speed key can also be used to create two Special Masters.
Press
Store
Speed
and then a key on the executor where you want the Master.
This will open a window like this:
Figure 1: Select Speed Master type window.
A Master Speed fader can be used to dynamically adjust the speed used by Chasers and Effects stored in cues..
A Master Rate fader can be used to dynamically adjust the timing of the cues.
Read more details about these two masters in the
These two speed faders can be enabled or disabled for each executor. It can be adjusted in the
6.60. Store key
176