MA Lighting dot2 XL-F User Manual - page 448
© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
by DMX address
from a cue list stored on a executor
from a specific cue
The selected fixtures are displayed in the
Syntax
1. Select fixtures in the fixtures view by DMX address.
Select Dmx 1.1
2. Select all fixtures from a cue list stored on a executor.
Select ExecButton1 1.1
3. Select all fixtures in a specific cue.
Select Cue 1 ExecButton1 1.2
Example 1
Let´s assume, you will select the fixture using the DMX address 1.1.
Press
Select
and tap in the
at 1.1 .
The fixture with the DMX address 1.1 is selected.
Example 2
Let´s assume, you will select all fixtures from the cue list, stored on executor 1.
There are three ways to do this:
a) Press
Select
and then press the respective executor button e.g.
.
b) Press
Select
and then tap on executor 1 in the
c) Press
Select
Exec
1
Please
.
All fixtures stored on executor 1 are selected in the fixtures view.
Example 3
Let´s assume, you will select all fixtures from cue 1 on executor 1.
There are three ways to do this:
a) Press
Select
Cue
1
and then press the respective executor button e.g.
.
b) Press
Select
Cue
1
and then tap on executor 1 in the
.
448