MA Lighting dot2 XL-F User Manual - page 481
© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
# 36 Too many numbers There are to many numbers in the command.
# 37 Copy N to M
elements not supported
You are trying to copy a larger number of objects to a smaller
number of objects.
# 38 Move N to M
elements not supported
You are trying to move a larger number of objects to a
smaller number of objects.
# 39 Move 1 to M
elements not supported
You are trying to move one object to several destinations.
# 40 Missing Hardware
You are trying to access hardware that aren't there.
# 41 Illegal layer
The layer you are trying to access is illegal.
# 42 Illegal filename
The entered filename is not valid.
# 43 Login needed
A login is required.
# 44 Insufficient user
rights
You don't have the sufficient user rights.
# 45 Not a valid clone
source
The source for your clone action isn't valid. There might be a
mismatch between the source and destination fixture.
# 46 Not a valid clone
destination
The destination for your clone action isn't valid. There might
be a mismatch between the source and destination fixture.
# 47 Clone source
fixture list expected
The console expects a source fixture list.
# 48 Clone destination
fixture list expected
The console expects a destination fixture list.
# 49 Expected object to
be cloned
The console expects more fixtures.
# 50 Invalid version
This function is not supported by this version.
# 51 Illegal time format The entered time format is not valid.
# 52 Operation aborted
by user
You canceled the operation.
# 53 PSR not available
You can't Partial Show Read the shows you've selected.
# 54 Variable not found The entered variable is empty or does not exist.
# 56 Preview is only for
cues
The entered object does not support a preview.
# 57 Object does not
support info command
The entered object has not an information.
# 58 Object is locked
You tried to access a locked object.
# 59 Illegal destination
The object can not be moved to the destination.
# 60 Edit not possible
You can not edit the object.
# 61 Move not possible
You can not move the object.
# 62 Copy not possible
You can not copy the object.
# 64 Command not
supported
The entered command is not valid.
# 65 Insert forbidden
You can not insert the object.
# 66 Can not assign
You can not assign the object.
# 67 Value too small
The entered value is too small.
# 68 Value too big
The entered value is too big
Error
Reason
481