Mackie TT System 32 Owner's Manual - Lp48 Card Routing

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7

12

LP48 Card Routing

If you choose the LP48 card as the 

source, then the available Instances 

to choose from will depend on the 

confi guration of the LP48 card.

The LP48 card has three different 

modes of operation:

10 Insert EQs

4 x 8 Loudspeaker Processor

5 Insert EQs and 2 x 4 Loudspeaker 

Processor (This is a split mode of the 

above two modes.)

Insert EQs

In Insert EQ mode, the signals assigned 

to the LP48 card go into the card, are 

EQ’d and return to the insert point only. 

They are not available for any other 

routing. The output from the LP48 card 

shows greyed-out labels for the inserts.

Loudspeaker Processors

In Loudspeaker Processor mode, there will either be 4 outputs (in 

LP48 split mode) or 8 outputs (in 4 x 8 mode).

The available outputs from the Loudspeaker Processor are the 

outputs from each crossover, such as a low, high for a two-way 

crossover, low, mid, and high for a three-way, and a low, low-mid, 

high-mid, and high for a four way crossover.

These can be routed to any input channel, or to any physical 

output,

LP48 in 

Split mode

LP48 

in 4 x 8 

mode