Mackie TT System 32 Owner's Manual - 2.4 Ds3232 Routing Macros

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7

36

2.4 DS3232 Routing Macros

Because you can now use input routing to freely assign any hardware input to any channel, 

you can assign some snake signals to bank 1, some to bank 2, and still others to bank 3. This 

can be done per channel as previously described. Additionally, three macro buttons makes 

quick routing possible for all snake inputs.

On the Expansion screen with a DS3232 present, if ANALOG 

is pressed, the analog snake inputs are automatically 

assigned in the Input Routing screen to the analog inputs:

In the Input Routing screen, the analog 

inputs are automatically fi lled with the card 

slot U-Net card inputs.

In the Expansion screen, if DIGITAL is pressed, the digital 

snake inputs are automatically assigned in the Input 

Routing screen to the digital inputs as shown on the next 

page of this guide.

Digital

Analog