Mackie TT System 32 Owner's Manual - Routing Presets

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7

6

Routing Presets

The following sections on Input Routing, Output Routing, and U-Net Routing are shown in 

some detail, with screenshots thrown in from all directions.

To make it easier for you, we have created routing presets that cover typical applications. You 

may fi nd that the presets do all that you need, so you do not have to fret over the details.

Routing Presets are stored on the console and can be loaded from the console but not saved. 

They can be both saved and loaded from the TT Control software. This is because routing 

changes can only be made from the control software. In the TT Control software, routing 

presets are saved and loaded from the File menu as usual. 

These presets are available in four types from the TT Control FILES dropdown menu, and 

from the console’s routing setup screen:

•  Global All Routing: Presets that affect all routing (Input, Output, and U-Net)

•  Input Routing: Presets that affect the Input Routing

•  Output Routing: Presets that affect the Output Routing

•  U-Net Routing: Presets that affect the U-Net Routing

You can also save your own presets using TT Control, and then recall these from the console 

as needed.

TT24 Console Setup Screen

Press “Routing” to bring up the Routing Setup 

Screen.

TT24 Console Routing Setup Screen

Press these to bring up a list of available presets 

for each one.

Routing