Mackie TT System 32 Owner's Manual - 2. Full I/o Routing

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7

4

2. Full I/O Routing

A full routing matrix has been added to allow complete input and output routing to and from 

the input and output channels, as well as direct output routing and hardware I/O patching. 

This includes analog and digital inputs and outputs. In addition, you can route U-Net signals 

in and out of the console and between two U100 cards in a single console. These functions are 

only accessed via the TT Control software. Routing changes cannot be done from the control 

surface except by loading presets or snapshots.

The routing screens allow things such as ADAT input routing to input channels on bank 1 or 

Aux Output Routing to the AES output. In addition it allows detailed routing of the signals 

from each card slot, doing away with the basic bank-based routing used for the DS3232 prior 

to software version 1.7. 

The routing screen is accessible from the central drop-down menu in the TT control PC 

application. Choose one of the four new Routing options: 

• Routing 

– 

Input

• Routing 

– 

Output

•  Routing – U-Net Card A In / Card B Out

•  Routing – U-Net Card B In / Card A Out