Mackie TT System 32 Owner's Manual - page 9

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7

9

The vertical list along the left shows input channels which will be listed by their default name 

and custom name (if assigned). Double clicking a channel will allow you to edit the channel 

custom name. These names are in a single column with the following contents:

Destination Input Channels

Notes

Analog 1-24

Full DSP when assigned to Analog Bank

Digital 25-48

Full DSP when assigned to Digital Bank or when 

UFXII installed

Line In 1-8

EQ Only

Card 1-8

Full DSP

Input Routing Table

Signal Sources

Drop Down 1

Drop Down 2

Drop Down 3

Hardware Input

Mic/Line

1-24

ADAT

1-24 (44.1 or 48k)

1-12 (88.2 or 96k)

Line

1-8

AES/SPDIF (one will be 

shown depending on the 

selection in setup>digital)

L-R

Tape

A L-R, B L-R

Talkback

In 

Card Slot

A - Card Type (e.g. U100) 

1-32 (note LP48 shows 

additional detail, see below)

B - Card Type (e.g. U100)

1-32 (note LP48 shows 

additional detail, see below)

Each Source Row is color coded according to the selection made in the Drop Down 1 source 

type: 

•  Hardware Input – Pale Blue (a very-faintly blue-tint of white)

•  Card Slot - Pale Yellow