Mackie TT24 Owner's Manual - 3.4.2 Eq

16

TT24 DIGITAL LIVE CONSOLE

TT24 DIGIT

AL LIVE C

ONS

OLE

Press the 

FAT

 button to display the selected channel’s 

OVERVIEW Touchscreen with all channel settings and 

meters. Although not all parameters can be adjusted 

from the OVERVIEW screen, touching a non-adjustable 

parameter opens its dedicated screen (i.e., touch the 

EQ graph to open the EQ Touchscreen). 

The specific information displayed and adjusted from 

the OVERVIEW screen depends on the selected channel 

type: Analog, Digital, Line, Effect Return, Group, Master, 

and Aux (see 

Overview Touchscreens

 on page 35). 

3.4.2 EQ 

Press the 

EQ

 button to display the selected channel’s 

EQ Touchscreen. Depending on the channel type, it will 

be either: 

•  4-BAND EQ: Four parametric EQ filters for Input 

Channels and Group Masters. 

See 

Four-Band Equalizer

 on page 38 for more infor-

mation. 

•  6-BAND EQ: Two parametric EQ filters, high- and 

low-shelf filters, and two narrow-band kill filters for 

Aux Masters and Main Outputs (L/R and C/Mono). 

See 

Six-Band Equalizer

 on page 39 for more infor-

mation. 

•  31-BAND EQ: Three 31-band graphic EQ filter for 

the Main Outputs (L/R and C/Mono). 

See 

31-Band Equalizer

 on page 39 for more infor-

mation.

3.4.3 DYN 

Press the 

DYN

 button 

to display the selected 

channel’s DYNAMICS 

(Analog channel) or 

COMPRESSOR (Aux Send 

Masters, Groups, and 

Main Outputs) Touch-

screens. The DYNAM-

ICS Touchscreen has 

the Gate/Expander and 

Compressor settings and 

their associated meters. 

Touch the Gate or Dynam-

ics graphs  to open their 

dedicated Touchscreens 

(although most parame-

ters can be accessed from 

the DYNAMICS Touch-

screen). 

See 

Dynamics

 on page 

40 for complete details.

3.4.4 GRP/AUX 

Press the 

GRP/AUX

 button to display the GRPS/AUX-

ES Touchscreen. Touch a GROUPS assignment button to 

assign the selected channel to that Group. The Quick-

Mix knobs adjust the selected channel’s level to the 12 

Aux Sends. Push a QuickMix knob to toggle that Aux 

Send pre- or post-fader. 

See 

Groups/Auxes

 on page 44 for more information. 

3.4.5 AUX MSTR 

Press the 

AUX MSTR

 button to display the AUX 

MASTER Touchscreen. The 12 Aux Master Sends can be 

adjusted using the QuickMix knobs. The selected Aux 

Master is listed in the top left of the screen. Change 

the selected Aux Master by pressing the desired Aux’s 

QuickMix knob. 

The top-half of the AUX MASTER Touchscreen 

displays the overview information for the selected Aux 

Master: metering, compression and EQ curves. Touch 

the EQ or Compression displays to open their associ-

ated Touchscreens (or press the 

EQ

 or 

DYN

 QuickMix 

buttons). 

Each Aux Send Master also has an OVERVIEW Touch-

screen that can be displayed by selecting an Aux Master 

and pressing the 

FAT

 button (see page 37). 

See 

Aux Master

 on page 43 for more information. 

Figure 3-5 QuickMix Section 

DYN

EQ

GRP/

AUX

FAT

SETUP

CTRL

COPY

HELP

UTIL

PASTE

STORE

RECALL

EFX

SNAP

AUX

MSTR

MATRIX

SNAPSHOTS

QuickMix

section

Snapshot

section

Engineer's Utility

Area