Mackie TT24 Owner's Manual - Grp Assign
50
TT24 DIGITAL LIVE CONSOLE
TT24 DIGIT
AL LIVE C
ONS
OLE
GRP ASSIGN
Select
L/R in the GRP ASSIGN area to route to stereo
source to the
LEFT and RIGHT MAINS outputs.
INPUT METERS
The meters show the pre-fader, pre-L/R assign level of
the stereo input.
6.14.4 METERING
Figure 6-36 UTILITY METERING
These meters show the levels for the Group/Matrix
outputs.
6.14.5 USER BANK
Figure 6-37 UTILITY USER BANK
To access the user bank, simply press the ANLG and
DGTL bank select buttons simultaneously. They will
both illuminate and the faders will snap to their current
settings, indicating the TT24 is in the user bank.
The user bank configuration screen (Utility/User
Bank) has a grid of buttons labeled 1-24 that allows you
to pick which channel will be assigned to the user bank.
A scrolling list of all channels is available to select the
user bank channels. Changes to the user bank are im-
mediate upon selection. This control is available via TT
control or LCD.
6.14.6 TEST TONES
Figure 6-38 UTILITY TEST TONES
A test tone + oscillator function provides a selection
of test signals including:
White noise
Pink noise
Sine and square waves of 100 Hz, 440 Hz, 1 kHz,
and 10 kHz
Test tone signals can be routed to any of the following
destinations:
Matrix A-H
Auxes 1-12
L-R
Ctr/Mono
There is a separate test tone activation button, level
control, and meter for your convenience. Access to the
test tone oscillator section is provided in TT control and
the LCD via UTILITY/TEST TONE.