Mackie TT24 Owner's Manual - 6.2.2 Touchscreen Buttons

35

Owner’s Manual

Owner’

s Manual

Figure 6-2 Band EQ Touchscreen

6.2.2 Touchscreen Buttons 

There are two types of Touchscreen buttons: 

•  On/off or selected/unselected 

An off/unselected button has black letters over 

a white background (

SOLO

 in Figure 6-3). An 

on/selected button has white letters over a black 

background. Touch the button to toggle its setting. 

•  Light switch 

A light switch toggles between the values located to 

the right of the switch. The selected value appears 

with black letters over a white background (

ALL 

ACTIVE

 in Figure 6-3). The unselected value has 

white letters over a black background (

ALL OUT

). 

The switch position aligns with the selected value. 

Touch the switch to toggle the value. 

Figure 6-3 MATRIX MIX Touchscreen

6.2.3 Touchscreen Name and Channel/

Function 

The name of the current Touchscreen is displayed in 

the top-center of the screen (

MATRIX MIX

 in Figure 

6-3). Some screens are specific to the selected channel 

or function. For example, the Analog and Effect Return 

OVERVIEW screens are different. The currently se-

lected channel/function appears in the upper-left of the 

Touchscreen (

Mtx C

 in Figure 6-3). Up and down ar-

rows appear on either side of the selected channel that 

can be touched to increment or decrement the selected 

channel. Pressing the up/down QuickMix arrows also 

increments/decrements the field. 

6.2.4 Sub Screens 

Some functions require one or more sub screens to 

adjust all parameters. These screens are accessed by 

touching a button or an area, such as an EQ graph. After 

viewing and adjusting parameters on the sub screen, 

return to the previous screen by pressing the hardware 

button that displayed the original Touchscreen. 

6.3 Overview Touchscreens 

There are seven variations on the OVERVIEW Touch-

screen: Analog, Digital, Line, Effect Return, Aux, Group, 

and Master. To display these screens, press the 

FAT

QuickMix button and: 

•  select the desired channel’s bank and press its 

SELECT

 button; 

OR

•  touch the up/down arrows next to the channel 

menu field to find the desired channel. 

6.3.1 Analog 

Figure 6-4 Analog OVERVIEW