Magma EB3600-AB User Manual - page 21
Manual is about: PCIe to PCIe Expansion
of
143
Magma
EB3600-AB | Chapter 2 Hardware Installation
21
Open Enclosure
Loosen the thumbscrews that retain the top cover of the chassis and slide the lid towards you as shown
below:
Install Expansion Interface Card
By default, the 2 Expansion interface cards are already installed in their designated slot. This model
EB3600-AB comes with 4 Interface cards, 2 for expansion and 2 for host server. There are two separate PCB
backplanes side-by-side in the chassis. Each PCB backplane requires 1 Expansion Interface card linked to
the host computer / server. The Interface card is Gen3 x16; it has two cable ports for linking either by x8 or
x16 connection. Should you need to install the card, follow the steps below.