Magma EB3600-AB User Manual - page 75
Magma
EB3600-AB | Chapter 4 General & Technical Information
75
Front Panel Status LEDs
LEDs on the front panel monitor internal temperature and show status of fans and power supplies. All LED's
should be green at all times. An orange LED means a fault of the corresponding item. The locator LED and
locator switches on the front and back panel locate the chassis in a rack installation. Push the switch on
either end of the chassis and the LED will blink on both front and back. Pressing either switch again, on
either side of the chassis will turn the LED off.
Should a problem occur with the chassis we included below explanations as to what all these items are
and how they should be treated.
Under normal operating conditions the status indicator LED’s should be green at all times. An orange LED
means a fault of the corresponding item listed in the picture above. If the chassis is functioning improperly,
you have the option of resetting the entire system by pressing and holding the Alarm Reset button (shown
in the above diagram) until the LEDs blink. The color of the LEDs will turn orange. This will enable the entire
device to reboot to its default settings. You can only do this once the chassis is turned off, but still operates
on standby power. So, ensure the power cable is connected between the chassis and the AC outlet.
Fan LEDs
Temperature Sensor Alarm LEDs