Magma EB3600-AB User Manual - page 93
Magma
EB3600-AB | Chapter 5 Management Console I/O Manager
93
6. Select "Use the following IP address"
a. For IP address enter 192.168.1.20
b. For Subnet mask enter 255.255.255.0
7. Click OK
How to configure your network setting in Linux / Ubuntu
1. Start or launch the Terminal window.
2. Stop Network Manager by typing service NetworkManager stop command in the terminal.
3. Type sudo ifconfig eth0 192.168.1.40 netmask 255.255.255.0 ( see screenshot below).
4. Type route add default gw 192.168.1.1
5. Then press enter to accept the new settings.
6. You need to restart the network by typing service network restart command in the terminal.
7. Type ifconfig, to check and verify that the new IP address and Subnet mask have been accepted
(see screenshot below).
When done, you can reset the Network Adapter IP address and restart your Network Manager.