Magma EB3600-AB User Manual - page 76
Manual is about: PCIe to PCIe Expansion
of
143
Magma
EB3600-AB | Chapter 4 General & Technical Information
76
Power Supply Indicator LEDs
If the LED stays Orange after replacing or swapping the faulty component, you have to reset the SNMP to
factory default settings. Hold the Alarm Reset button (see picture below) until the LEDs blink. The color of
the entire LEDs will turn orange and the device will reboot to its default settings, all LEDs should turn on solid
Green.
Control Switches
There are four control switches on the interface card: SW1, SW2, SW3 and SW4