Magma EB3600-AB User Manual - page 77
Manual is about: PCIe to PCIe Expansion
of
143
Magma
EB3600-AB | Chapter 4 General & Technical Information
77
SW1 and SW2
SW1 and SW2 should not be altered or changed.
See screenshot below for their corresponding combination of dipswitch settings.
SW3
Link width can be changed by using the following dipswitch settings. By default, the card is set to x16.
SW4
Toggle switch for interface mode setting , the interface card can be used either host or expansion . Below
are the two mode-settings for the interface card.