Magnadyne PL70 Installation manual - page 12
12
Automatic Door Locking and Unlocking Feature Programming
Warning-
• If you program the automatic door locking feature “on” you “must” also connect one of our door trigger wires to the
dome light wire of the vehicle.
• Do not risk the customer getting locked out of the vehicle. For proper operations, our module must see door open and
door closed signals from the vehicle.
• On vehicle’s with (-) door trigger circuits, connect our green door trigger wire to the vehicle’s dome light wire.
• On vehicle’s with (+) door trigger circuits, connect our violet door trigger wire to the vehicle’s dome light wire.
To Enter Door Lock and Unlock Feature Programming:
1. Turn on the ignition key.
2. Depress the program switch (8) times within 30 seconds after turning on ignition.
3. The parking lights will flash (8) times. The horn will chirp (8) times.
4. Your are now in automatic door lock and unlock feature programming mode.
Brake Pedal Depresses Door Locking (Factory Default Setting is “off”)
The module can be programmed to lock or not lock the vehicle’s doors when the brake pedal is depressed. The doors
must be closed and the ignition key must be on for the brake pedal to lock the doors.
To Turn the Brake Pedal Door Locking Feature On:
• Depress the “LOCK” button.
• The parking lights will flash (1) time. The horn will chirp (1) time.
To Turn the Brake Pedal Door Locking Feature Off: (Factory Default Setting)
• Depress the “LOCK” button.
• The parking lights will flash (2) times. The horn will chirp (2) times.
Ignition Off Door Unlocking (With Automatic Door Locking Programmed On, the Factory Default Setting is On)
This feature works in conjunction with the brake pedal door-locking feature. The brake pedal door-locking feature must be
programmed “on” in order to also have ignition off unlocking.
With this feature “on” the doors will unlock when the ignition key is turned off.
With this feature “off”, the doors will “not” unlock when the ignition is turned off.
To Activate the Ignition Off Unlocking Feature:
• Depress the “UNLOCK” button.
• The parking lights will flash (1) time. The horn will chirp (1) time.
• The module is now programmed to “unlock” the doors when ignition is turned Off.
To Deactivate the Ignition Off Unlocking Feature:
• Depress the “UNLOCK” button.
• The parking lights will flash (2) times. The horn will chirp (2) times.
• The module is now programmed to “not” unlock doors when the ignition is turned off.
Last Door Automatic Arming Starter Interrupt Programming
The alarm module can be programmed to automatically arm the starter interrupt port 30 seconds after you exit the
vehicle. In addition, the doors can also be programmed to lock or not lock upon automatic passive arming of the
starter interrupt port.
To enter Last Door Automatic Passive Arming Starter Interrupt Feature Programming:
• Turn on ignition key.
• Activate the program switch (6) times within 30 seconds after turning on the ignition.
• The parking lights will flash (6) times and the horn will chirp/sound (6) times to indicate you are now in feature
programming.
To turn the automatic passive arming starter interrupt feature ”ON” and to ”lock” the doors upon passive arming:
• Depress the ”Unlock” button.
• The LED and parking lights will flash (2) times. The horn/siren will sound (2) times
To turn the automatic passive arming starter interrupt feature ”ON” without automatic passive door locking:
• Depress the ”Unlock” button.
• The LED and parking lights will flash (3) times. The horn/siren will sound (3) times.
To turn the automatic passive arming starter interrupt feature back ”Off”(Factory Default Setting):
• Depress the ”Unlock” button.
• The LED and parking lights will flash (1) once. The horn/siren will sound (1) once.