Mak Grills EP-380-1G Owner's Manual - Screen Display - Timer
Screen Display - TIMER
Screen Display - ELAPSED TIME
Screen Display - USER 1
Description:
Settings:
Description:
Settings:
Description:
The TIMER can be set to count down and alarm when it reaches zero. It
will reset to zero whenever the grill is turned off.
Press and hold the SET button for 3 seconds. Minutes will flash.Press
SELECT and hours will flash. Use arrow buttons to adjust to desired
time. Press the SET button again to accept. Once the timer displays the
desired time use the SET button again to START & STOP the timer.
When the timer reaches zero an alarm will sound and the screen will
flash until any button is depressed. When the grill is turned off all alarms
will reset to OFF. Press and hold the SET button for 3 seconds to reset
the timer back to zero.
The ELAPSED TIME is a count-up timer which shows the total length of
cooking time. It will reset to zero whenever the grill is turned off.
USER PROGRAMS are designed to set the grill to automatically adjust
the grill temperature using time and/or probe temperatures. Example: If
you wish to cook a Prime Rib on HIGH for 15 minutes then change the
cooking temperature to 250 degrees for 3 hours, or until Probe 1 reaches
135 degrees. You can use any of the three User Programs to make the
grill automatically follow this sequence.
Each User Program will be saved once entered, and will have to be
Press the SET button to start the ELAPSED TIME, press again to stop.
Press and hold the SET button for 3 seconds to reset the timer back to
zero.
NOTE: For best results, prevent twisting the probe cable, exposing
it to high heat or direct flame, or immersing them in water. To
clean, wipe the probe with a damp cloth with mild detergent. The
probes should only be used to monitor internal meat temperatures,
not your grill's cooking temperature. Store probes in a dry place
away from water or moisture.
MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-380-1G
9