Mak Grills EP-380-1G Owner's Manual - Pellet Boss
PELLET BOSS
™
S
CREEN
D
ISPLAY
D
ESCRIPTIONS
& S
ETTINGS
Screen Display - SET POINT
Description:
Settings:
Shows the temperature setting for the grill cooking chamber.
The SET POINT temperatures can be changed in five degree
increments from SMOKE (170-180 degrees) up to 450 degrees. The
HIGH setting is for cooking food up to 500 degrees. To change the
temperature setting for the grill, press “SET”. The temperature will flash.
Use the arrow keys to adjust to your desired cooking temperature, then
press “SET” again. The new temperature will stop flashing and the grill
will adjust to the new temperature.
Screen Display - GRILL TEMP
Description:
Settings:
Screen Display - PROBE 1
Description:
Settings:
PROBES 2 & 3 - Description & Settings are the same as Probe 1.
Shows the
temperature inside the grill.
There are no user settings for this screen. To change the temperature
follow the instructions above.
Displays the internal temperature of the food it is inserted into. If no
probe is plugged into the jack, or if the probe is not working, it will
display ”CHECK” Note: the temperature probes have a range of 50 to
225 degrees. If the probe is between 40 and 49 degrees it will display
”LOW”. If the probe is below 40 degrees it will display ”CHECK”. Above
225 degrees the probe display screen will read 225.
To add a SETPOINT alarm for the probe press SET, the screen will
flash, use the arrow buttons to adjust the setting from OFF to 225
degrees. Press SET again to accept. Note: when alarm is set the
display will show ”A” next to the probe temperature. Once the set
temperature is reached the alarm will sound and the screen will flash
until any button is depressed. If the grill is turned off all alarms will reset
to OFF.
actual
MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-380-1G
8