Mak Grills EP-380-1G Owner's Manual - Settings:
12
Settings:
Description:
Settings:
Description:
Settings:
To enable the MANUAL MODE press and hold the SET button
for 10 seconds. Once enabled, you can set the grill temperature from the
following options; SMOKE (175), LOW (225), MEDIUM (275), MEDHIGH
(350) & High (450+). To change the temperature setting for the grill press
”SET”, the temperature will flash. Use the arrow buttons to adjust. When
finished press ”SET” again. The temperature will stop flashing and the grill
will adjust to the new set temperature. Note: Because there is no working
thermocouple, the screen will not show the grill temperature. To return to
the NORMAL MODE press and hold the SET button for 3 seconds.
This screen will activate whenever the igniter rod is on.
Most usually during start-up but will also activate in the case of an “auto
relight” sequence, which initiates if the fire in the firepot has gone out.
IGNITING PELLETS will display on the PELLET BOSS ™ screen and the
grill will repeat the lighting sequence (3) three times, displaying the words
“CHECK FIRE POT” before shutting the grill completely off.
There are no user settings for this feature.
This screen appears when you turn the ON/OFF switch to
OFF. The controller will run the fan on high speed until the temperature in
the grill drops to 160 degrees. It will then switch to a 4 minute countdown-
timer and entirely shut the unit OFF. If the unit has not cooled down to
160 degrees in 20 minutes the grill will automatically shut off. This feature
is designed to help burn up all remaining pellets in the fire pot and give
you a clean start the next time you cook. Simply turn the grill off and let
the PELLET BOSS™ do the rest!
There are no user settings for this feature. If you wish to
override the SHUT DOWN mode just press any button and the unit will
turn off.
IGNITING PELLETS
COOL & SHUT DOWN
MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-380-1G