Mak Grills EP-380-1G Owner's Manual - Settings:
overwritten to change. When a program is running, the Pellet Boss
screen will display the progress of the sequence by displaying the
remaining time left in the sequence or display the meat probe
temperature. When a sequence change initiates, an alarm will sound
three times and display the new SET POINT temperature for the
program.
To set-up a USER PROGRAM, follow these steps:
To set up any USER PROGRAM, press the arrow buttons to reach
USER PROGRAM 1, 2 or 3
Press SET-the screen will flash OFF
Arrow up or down to display SETUP
Press SET
The screen will now display STRT 1.1, SET:SMKE
Use arrow buttons to adjust to your program's starting temperature
Press SET to accept
The screen will now display END 1.1, SET:NONE
Use the arrow buttons to select TIME, MP1, MP2 or MP3 (MP stands
for Meat Probe)
If TIME is selected, the TIMER screen will appear. Set timer by
following the directions for TIMER above.
If MP1, 2 or 3 is selected, the PROBE screen will appear. Use arrow
buttons to select the temperature you wish the meat temperature to
reach. Press SET to accept.
The screen will display STRT 1.2 SET: SMKE and go through all of
the same screen settings as 1.1
To end the program, set the END to NONE
Once the program is complete the USER1 screen will display OFF
To start the program, you will need to press SET, arrow to START,
press SET to accept, and the program will begin to run.
To stop the program, press SET, select a different USER PROGRAM
or select OFF
To restart any USER PROGRAM, select START again, or change the
SETPOINT temperature
USER 2 & 3—Follow the above steps to program. Descriptions and
Settings are the same as USER 1.
Settings:
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
MAK GRILLS Owner’s Manual • Pellet BBQ Smoker-Grill • Model EP-380-1G
10