Nds Surgical Imaging Dome Ex User Manual - page 20
18 | Dome Ex Display
Dome E2 Specification
In locations where 240V outlets are used, connect the Dome E2 display to a center-tapped,
240V, single-phase supply only (for Canada and the United States).
Category
Characteristic Item
Specification
Screen
Screen size diagonal
498 mm (19.6 in.)
Resolution
1200 x 1600 pixels (portrait)
1600 x 1200 pixels (landscape)
Pixel pitch
0.249 mm x 0.249 mm
Pixel arrangement
Subpixel vertical stripe
Active area (mm)
398.4 (H) x 298.8 (V)
Grayscale supported
3061 shades of gray
Refresh rate
60 Hz
Contrast ratio
850:1 (typical)
Brightness
1140 cd/m
2
(typical)
Pixel rise/fall time
40 ms (typical)
Viewing angle
170° (± 85°) horizontal/vertical
Interface
Digital Video In
DVI Rev. 1.0 digital dual-channel connector
Display control - brightness/
contrast
DDC2B+
Display identification
EDID read using DDC2B+
USB hub
Universal Serial Bus (USB) Rev. 2.0:
1 uplink B port; 2 downlink A ports
Display status
Dual-stack tricolor LEDs on back panel
Input formats
Landscape orientation
1600 x 1200 (8-bit and 24-bit per pixel)
Portrait orientation
1200 x 1600 (8-bit and 24-bit per pixel)
VGA to XGA/SXGA
640 x 480 to 1024 x 768 in both landscape and
portrait rotations, 1280 x 1024 displayed in
landscape rotation
Screen type
AMLCD (active matrix liquid crystal display)
Physical
Display size (without stand)
440 mm x 343 mm x 95 mm
(17.3 in. x 13.5 in. x 3.75 in.)
Display weight (without stand)
5.5 kg (12 lb)
Mounting options
Desktop stand (standard);
100-mm VESA mounting (optional)
Power
Adapter, 4-pin power connector Ault MW116KA1249F53 (CAUTION: Use only the
power adapter supplied with the display unit.)