Nds Surgical Imaging Dome Ex User Manual - page 22
20 | Dome Ex Display
Dome E2cHB Specification
In locations where 240V outlets are used, connect the Dome E2cHB display to a center-
tapped, 240V, single-phase supply only (for Canada and the United States).
Category
Characteristic Item
Specification
Screen
Screen size diagonal
498 mm (19.6 in.)
Resolution
1200 x 1600 pixels (portrait)
1600 x 1200 pixels (landscape)
Pixel pitch
0.249 mm x 0.249 mm
Pixel arrangement
RGB vertical stripe
Active area (mm)
398.4 (H) x 298.8 (V)
Colors supported
16.7 M
Refresh rate
60 Hz
Contrast ratio
700:1 (typical)
Brightness
800 cd/m
2
(typical)
Pixel rise/fall time
40 ms (typical)
Viewing angle
170° (± 85°) horizontal/vertical
Interface
Digital Video In
DVI Rev. 1.0 digital dual-channel connector
Display control - brightness/
contrast
DDC2B+
Display identification
EDID read using DDC2B+
USB hub
Universal Serial Bus (USB) Rev. 2.0:
1 uplink B port; 2 downlink A ports
Display status
Dual-stack tricolor LEDs on back panel
Input formats
Landscape orientation
1600 x 1200 (8-bit and 24-bit per pixel)
Portrait orientation
1200 x 1600 (8-bit and 24-bit per pixel)
VGA to XGA/UXGA
640 x 480 to 1024 x 768 in both landscape and
portrait rotations, 1280 x 1024 displayed in landscape
rotation
Screen type
AMLCD (active matrix liquid crystal display)
Physical
Display size (without stand)
440 mm x 343 mm x 95 mm
(17.3 in. x 13.5 in. x 3.75 in.)
Display weight (without stand)
5.5 kg (12 lb)
Mounting options
Desktop stand (standard);
100-mm VESA mounting (optional)
Power
Adapter, 8-pin power connector BridgePower BPM130S12F02 (with power switch)
(CAUTION: Use only the adapter supplied with unit.)