Nds Surgical Imaging Dome Ex User Manual - page 26
24 | Dome Ex Display
Dome E3cHB Specification
In locations where 240V outlets are used, connect the Dome E3cHB display to a center-
tapped, 240V, single-phase supply only (for Canada and the United States).
Category
Characteristic Item
Specification
Screen
Type
AMLCD (active-matrix liquid crystal display)
Screen size diagonal
540 mm (21.3 in.)
Resolution
1536 x 2048 pixels (portrait)
2048 x 1536 pixels (landscape)
Pixel pitch
0.211 mm, 120 dpi
Pixel arrangement
R,G,B vertical stripe
Active area (H x V)
433.2 x 324.9 mm (17.05 x 12.79 in.)
Color supported
16.7 million colors; 256 shades of gray (programmable
gamma from palette of up to 2041 shades)
Refresh rate
60 Hz
Contrast ratio
750:1 (typical)
Brightness
700 cd/m
2
(typical)
Pixel rise/fall time
24 ms typical (14 ms Tr/10 ms Tf)
Viewing angle (CR 10: 1)
170° (± 85°) horizontal/vertical
Interface
Digital Video In
DVI Rev. 1.0 digital dual-channel connector
Display control (brightness/contrast) DDC2B+
Display identification
EDID read using DDC2B+
USB hub, on stand
Universal Serial Bus (USB) Rev. 2.0:
1 uplink B port; 2 downlink A ports
USB uplink, on display
Universal Serial Bus (USB) Rev. 2.0:
1 uplink mini-B port
Display status
Dual-stack tricolor LEDs
Input formats Landscape orientation
2048 x 1536 (8 and 24-bit color per pixel)
Portrait orientation
1536 x 2048 (8 and 24-bit color per pixel)
VGA/XGA
640 x 480 to 1280 x 768 pixels (displayed in
both landscape and portrait orientations)
Physical
Display size (without stand)
475 mm x 369 mm x 102 mm (18.7 in. x 14.5 in. x 4.0 in.)
Display weight (without stand)
6.35 kg (15 lb) typical
Display weight (with stand)
10.2 kg (22.5 lb) typical
Mounting options
100-mm VESA compliant mounting;
Desktop stand with integrated USB (standard)
Power
Adapter, 8-pin power connector
Adapter, 6-pin power connector
JEC Korea Corporation, Type JMW1150KA2423F51
JEC Korea Corporation, Type JMW1150KA2400F52
(CAUTION: Use only the adapter supplied with unit.)