NEC SL1000 User Manual - General Information
2
General Information
This guide describes Hotel features operation at the Reception when SL Series (SL1000/SL1100)
system is configured for Hotel environment.
Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ
from those in this guide. Check with your NEC Authorized Supplier / System Administrator and
make a note of any differences.
Multi-Line Terminal is strongly recommended
to use at the Reception for their easy
operations.
The reception terminal can have a 60 Keys
DSS Console assigned that will show the
status of the hotel room telephones such as
“Check-In/Out”, “Room Clean” and so on.
The status of indication can be switched by
pressing the keys at the bottom of three keys.
Ask your NEC Authorized Supplier for the
details of DSS Console installation and
Function Key setting.
Hotel Reception Terminal & DSS Console
PAGE
GROUP
DOOR
Setting Example
Multi-Line Terminal with DSS Console
BLF on DSS Key
Fast
Blinking
Blinking
Slow Blinking
Key
Function
OFF
ON
(200ms
ON/OFF)
(400ms
ON/OFF)
(800ms ON /
200ms OFF)
PAGE
Message Waiting
Status
No Set
Set
---
---
---
GROUP
Wake-Up Call
Status
No Set
Set
---
No Answer
---
DOOR
Room Status
Check-Out
Check-In
Maid
Required
Maid in
Room
Inspect
Room
The status can not be changed by pressing the DSS Key.
DSS Console will become normal indication in case the Receptionist presses
“light ON
”
status PAGE / GROUP / DOOR Key.
The Receptionist can place an Intercom Call by pressing the DSS Key at any time. (even
during status indication)