NotifEye Wireless Sensors and Ethernet Gateway Manual - page 10
10
Contents Page
2. Creating a New Notification
Click on the “Create New Notification” link or click on the “+” sign.
Title
Allows you to name your notification, e.g., Fridge#1 Temperature Alert
Class of Notification
There are four notification options available when creating a new notification.
• Application:
Application notifications are sensor specific (temp sensor = trigger alert when temp is above
70°F, etc.). If creating an application specific notification, you will need to choose what sensor type you are
creating the alert for either temperature or humidity. The system will automatically populate a list of sensor
types that are currently being used within the network. The notificatiion you create will be based on the
selected sensor type.
• Inactivity:
Set up “Inactivity” notifications to alert you when your sensors and/or gateways have stopped
communicating with the servers. Failure to set up an “Inactivity” notification will result in no email/SMS text
being sent should your sensors stop communicating with the servers. This can also be used for inactivity in
the gateway.
• Low battery:
Allows users to define a battery power percentage level that will trigger an alert from the
system, warning them to replace batteries.
• Advanced:
Allows the user to set notifications based on more advanced rules; such as comparing past data
points with the current one to determine if the notification should be sent.
NotifEye after Aware period:
Sends a notification any time a sensor exceeds set measurement limits and
enters an aware state.
Back Online:
Sends a notification when a connection is restored.
Battery below 10
(%): Sends a notification when a battery drain reaches 10% battery life.
When you are finished, click the “Create” button.
3. Setting and Editing Notification Settings
People that will receive this notification
For each person that you want to receive notifications, start typing a name into the box and the
system will automatically populate the name of a user within your sensor network. If there are already
multiple users on the network, a dropdown list of names will appear. Select the name of the user for
Select the class of
notification