Novatac EDC-120P User Manual - 2. User’S Guide.
2. User’s Guide.
Using the Single Push Button:
The single push button is used to turn the light on or off, and access
other functions. The following concepts are important to understand
the operation of your light:
Click:
a quick push and release of the button lasting less than one third of
a second.
Press:
a long push and release of the button lasting more than one third of
a second.
You must pause for more than one third of a second between
commands to prevent commands from running together.
Turning the light on:
Click or press the button once. Each time the light is turned on it is
forced to the Primary setting.
When the light is on:
Toggle between the Primary and Secondary settings by double-
clicking the button. If on the Minimum or Maximum setting, the light
will return to the last Primary or Secondary setting used.
Set it to the Minimum setting by triple-clicking the button.
Momentarily set the light to the Maximum setting by pressing the
button. Releasing the button returns it to the previous setting. Lock
the light on the Maximum setting by click-pressing the button.
Ramp the current brightness setting up or down by click-click-
pressing the button. See below for a more detailed explanation.
Enter the Options menu by click-click-click-pressing the button. See
below for a more detailed explanation.
Turning the light off:
Click the button once.
From off, the light can be turned directly on to the Maximum setting
by click-pressing the button. The light will stay on until it is turned
off.
- 3 -