Novatac EDC-120P User Manual - Option 2: Emergency Sos
Option 2: Emergency SOS
(…---…)
The SOS option flashes the international emergency SOS signal (dot,
dot, dot, dash, dash, dash, dot, dot, dot). Setting it once enables it.
To stop the SOS signal, turn the light off.
If the Automatic Turn-Off option is enabled, The SOS signal will turn
off after 5 minutes.
The default setting is: Disabled.
The Emergency SOS may be assigned to any brightness setting. See
Changing Brightness Settings.
Option 3: Locator Flash
(dim flash)
The Locator Flash option dimly flashes the light every 3 seconds
when it is turned off. This allows you to find your light in the dark.
The Locator Flash runs in the background of all other functions, and
will continue to function until disabled.
The Locator Flash is a toggle setting. Setting it once enables it while
setting it again disables it.
The default setting is: Disabled.
Option 4: Force Setting
(long flash)
The Force Setting option forces the light to turn on to the desired
setting. When the Force Setting option is disabled, the light will
remember which setting was used when it was turned off, and
returns to this setting when it is turned back on.
To select a setting to be forced, first disable the Force Setting option.
Select the Minimum, Maximum, Primary or Secondary setting to be
forced. Enter the Options menu and re-enable the Force Setting
option. The light will now turn on to the selected setting.
If the forced setting is Minimum or Maximum, double-clicking will
take you to the Primary setting.
The Force Setting option is a toggle setting. Setting it once enables it
while setting it again disables it.
The factory default is: Enabled with the light forcing on to the Primary
setting.
- 7 -