Novatac EDC-120P User Manual - Option 6: Automatic Turn Off
Option 5: Automatic Button Lock (three rapid flashes)
The Automatic Button Lock option locks the light off after it has
been off for five (5) minutes. If the button is pressed while the light is
locked, it will flash three times and remain off.
To release the Automatic Button Lock, triple-click the button. After
the third click, the light will turn on.
When the Automatic Button Lock option is enabled, the light can
manually be locked by triple-clicking from off.
The Automatic Button Lock option is a toggle setting. Setting it once
enables it while setting it again disables it.
The default setting is: Disabled.
Option 6: Automatic Turn Off
(bright-to-dim)
The Automatic Turn Off option turns the light off after five (5) minutes
of button inactivity. The light will provide a warning prior to turning
off by slowly sequencing down to the lowest brightness, and slowly
blinking for ten (10) seconds. Clicking the button once during the
warning period will restore the light to its original setting.
The Automatic Turn Off option is a toggle setting. Setting it once
enables it while setting it again disables it.
The default setting is: Disabled.
Option 7: Simple Momentary
(short-long flash)
The Simple Momentary option allows momentary on and click on.
When enabled, the light will stay on as long as the button is pressed.
Releasing the button turns the light off.
Also, a click turns the light on and another click turns it off.
When the Simple Momentary option is disabled, the light remains on
when the button pressed OR clicked.
Simple Momentary is a toggle setting. Setting it once enables it while
setting it again disables it.
The default setting is: Disabled.
- 8 -