Oberheim OB 12 Operating Manual - page 120

OB   12  

Z-Domain Synthesizer

 11.2 ERROR MESSAGES

CRC ERROR

It occured an error in the installation of the software up-date (error in reading the datas, transmission

interruption, etc...). Swithc off the instrument and start the installation procedure (see par. 11.1).

DATA LOSS DETECTED – PROGRAM

There is a loss Program datas (by switching the instrument off during the memorization). The

screen displays the unusable Program datas (compared to the maximun number) and one in the

check phase. The unusuable Program will be replaced by default Program.

DATA LOSS DETECTED – TIMBRE

There is a loss Timbre datas (by switching the instrument off during the memorization). The screen

displays the unusable Timbre datas (compared to the maximun number) and one in the check

phase. The unusuable timbres will be replaced by INIT TIMBRE.

240

If the first software installation has not succeeded (because for ex. of transmission faults), the

instrument cannot be switch on in the normal way as in such a case the internal memory content

is not the correct one.

In such a case please proceed with the updating procedure manually by pressing button [ESC]

when you switch it on. The display will show “Waiting for MIDI Data” and will wait for the MIDI

messages concerning the software that has to be installed.