Oberheim OB 12 Operating Manual - page 99

OB   12

Z-Domain Synthesizer

219

The CURRENT MEASURE parameter shows the numbers of the bars as they pass ((useful during

over-recording to allow optimum placing of any added notes), while the TEMPO field indicates the

metronome time for the recording.

The screen also contains the STOP ([F2]) command for stopping the recording and CLEAR ([F1])

for deleting the data present when the key itself is pressed.

If RESET (button [F3]) is selected, the recording will be returned to bar 1.1.

After you have played the Motion you require, select the DONE option using button [F3] to save

the data in the Motion Location already selected. The display will then signal that saving is in

progress:

MOTION EVENT EDITOR

The MOTION EVENT EDITOR allows the contents of a Motion to be shown on the display in the

form of events generated by the panel controls. This function also allows you to modify the contents

of the Motion of your choice as you wish, by deleting unwanted events, for example, or creating

new ones.

From the Motion Recorder Main Menu:

Select field 2-MOTION EVENT EDITOR; the display will show the page for selection of the Motion

whose contents are to be displayed:

Use the PLEASE SELECT MOTION LOCATION option to select the Motion to be monitored, then

press button [F2] and the display will show its contents:

As can be seen, the video page is divided into three columns:

•

The first column on the left shows the position of the event within the Motion expressed in

BAR.CROTCHET.FRAME;