Oce Arizona T220 User Manual - Menu Structure
Océ | User Interface
4-26
3010100686-A
4.3
Menu Structure
There are three main menus accessed by pressing the
MENU
key pad. Each of these
menus has various submenus as indicated below.
4.3.1
Print Queue Menu
The Print Queue menu allows the operator to select a job for printing from all jobs stored
on the printer’s hard drive. It provides the option to change the media thickness, image
offsets, and heater duty cycle before printing, if desired.
4.3.2
Operator Menu
The Operator menu has six submenus: Maintenance, Test Prints, Print Parameters,
Units, Set Clock, and About Printer. The details of these submenus and how to access
them are provide here.
Maintenance
The Maintenance Menu consists of various commands that support maintenance
activities for the printer. The commands are:
High Purge Nozzles
This is used to clear contaminants out of the nozzles. Contaminants can be either
environmental particles or dried ink.
Long Purge Nozzles
This is used primarily to clear solvent that may have migrated up into the
printheads if the printer has been idle for more than 2 hours.
Recovery Purge Nozzles
This command is used as a troubleshooting tool to restore a printhead that will not
respond to a high purge or to manual head swabbing.