Oce Arizona T220 User Manual - Color Bar
Menu Structure |
3/10/03
4-31
COLOR BAR
The Color Bars menu prints a set of color bars. The eleven color bars start with
Light Magenta and end with Black. Follow these steps to print the color bars:
1. Press the
MENU
button twice at
TEST PRINTS nozzle print
. You then
see:
TEST PRINTS
color bars
2. Press
ACCEPT
. You then see:
COLOR BARS
overlap: (4, or 8-pass)
3. Use the +/- buttons to set overlap type and press
ACCEPT
. You then see:
COLOR BARS
dir.: (bidir LR, unidir LR)
4. Use the +/- buttons to set the write direction, and press
ACCEPT
. You
then see:
COLOR BARS
position: (left, center, or right)
5. Use the +/- buttons to set the print origin, and press
ACCEPT
. You then
see:
COLOR BARS
print width: (8.0" - 59.9")
6. Use the +/- buttons to set print width (8.0" - 59.5"), and press
ACCEPT
.
You then see:
COLOR BARS
(4 or 8) pass
7. Use the +/- buttons to select the number of passes, and press
ACCEPT
.
The printer begins printing the color bars.
CONFIGURATION PRINT
The Configuration Print menu provides the operator and Océ Display Graphics
Systems service technicians with machine-settings data if the unit must be diagnosed
or recalibrated. A previous print from your printer should be stored for reference.