Oce Arizona T220 User Manual - page 64
Océ | Operating the Arizona T220
5-54
3010100686-A
5.5.8
F
lushing the Heads
It may occasionally be necessary to flush out the heads with solvent. There are several
reasons for doing this:
•
If the carriage has been left uncapped too long and initiating Purges or
Swabbing the Print Heads is not sufficient to recover any blocked nozzles.
•
When performing maintenance on the T220 that requires the power to be
turned off for more than an hour.
•
If there is a marked deterioration in print quality over a period of time.
Parts Required:
•
3010100747 Assy Syringe 60ml
•
24x 0401-0116 Plug Luer Female
•
24x 0401-0117 Plug Luer Male
Procedure:
1.
Fill the syringe with filtered CGS 80 by connecting it to the solvent bottle insert and
retracting the plunger (the solvent bottle insert has a filter at the bottom).
2.
Loosen the three 1/4 turn screws on the carriage cover with a flathead screwdriver,
then lift the cover off the carriage.
Figure 29 Removing Carriage Cover