Oce Arizona T220 User Manual - Printing A Job

Printing a Job |

3/10/03

5-41

5.3

Printing a Job

The following are basic guidelines for printing an image on the Arizona T220:

1.

Press the 

MENU

 button on the control panel to enter the menu system. The Print 

Queue menu is always the first main menu option. 

2.

Press 

ACCEPT

 to enter the Print Queue menu. 

The LCD panel displays the most recent job sent to the print queue by the host 

(i.e., PosterShop).

You have four possible choices:

a) Press 

CANCEL

 to quit viewing the print queue and proceed to the next 

main menu option which is the Operator menu.

b) Press 

MENU

 or 

BACK

 to return to the Print Queue menu.

c) Press the + or - keys to cycle through all avaliable print jobs.

d) Press 

ACCEPT

 to confirm that you want to pr0ceed with the displayed 

print job.

3.

Press 

ACCEPT

 and the control panel display shows the following print information.

Thickness, heat setting and offsets values are retained from the previous time these 

values were entered. Ensure that they are appropriate to the current media and print job. 

If not, use the method described below to change them.

[ 0] Test Image                              8B

(H * V [mm] 271 * 1289, Offsets      (+ 0 * +755)

Job number & file name

Pass mode

Direction 

mode

Image Offsets

Image Size

Thickness: 00.250mm, Heat: 20%

 Offsets: H    +0mm, V +755 mm       (+/- to change)