Oce im2330 Network Administration Manual - page 20

1 Setting up Network Server

18    Setting up NetWare Print Server

15

Enter the print server name, check the “Define additional proper-

ties” option and click [Create].

y

The print server name must be “MFP_[NIC Serial Number]”.  You can find the Unit 

Serial Number of the equipment on the NIC Configuration list can be printed from the 

control panel.

16

Display the Assignments window and click [Add].

y

The Select Object dialog box appears.

17

Select a created printer and click [OK].

18

Click [OK] to close Assignments window for the print server.

y

The print server is created.

Setting up the NetWare in NDPS Mode

This equipment supports printing over NetWare 5.1/6.0/6.5 networks running either the TCP/IP 

protocols or the IPX protocol. For pure IP printing, this equipment takes advantage of features in 

NDPS (Novell Distributed Print Services).

An administrator can use either Novell Printer Gateway or Océ  NDPS Gateway to set up the 

NetWare server in NDPS mode.

 P.18 “Setting up NDPS Using Novell Printer Gateway”

 P.22 “Setting up NDPS Using Océ NDPS Gateway”

Setting up a NetWare environment correctly requires the presence and active cooperation of the 

Novell network administrator. You must have administrator privileges on the network to create 

new NDPS objects.

Setting up NDPS Using Novell Printer Gateway

NDPS is not like the earlier queue-based versions of NetWare printing. Instead, you use an 

NDPS Manager and a Printer Agent, which control the tasks previously handled by a print 

queue, print server, and spooler. You can also make the printer driver available for clients to 

download from Windows client computers.

Before configuring the NetWare file server in NDPS mode, please confirm followings:

y

For NetWare 5.1, the Support Pack 8 and Novell Gateway version 2.1.6 or later with 

ndps3sp2c are installed.

y

For NetWare 6.5, the Support Pack 5 and Novell Gateway version 3.00 or later with 

ndps3sp2c are installed.

y

Make sure you have a valid IP address for this equipment and for any computers that will 

print to it (when used in the TCP/IP network).

y

In the equipment setup, enable TCP/IP and enter the IP address, Subnet mask, and Gate-

way address for this equipment (when used in the TCP/IP network).

Setting up the NDPS with NetWare Administrator

1

In NetWare Administrator, select the container object to create the 

printer and click the [Object] menu and select [Create].

y

The New Object dialog box appears.