Oce im2330 Network Administration Manual - page 57

Troubleshooting Hardware Errors    55

y

Drawer Open

The Drawer Open error icon shows which drawer is open: upper, middle, or lower. You must 

close the specified drawer to resume printing and copying functions.

y

Toner Empty

The Toner Empty icon indicates that the toner is empty.

For information on resolving the error condition, refer to “REPLACE TONER CARTRIDGE 

SYMBOL” in Operator’s Manual for Basic Function.

y

Toner Full

The Toner Full error icon indicates you need to replace the toner container. For information 

on resolving the error condition, refer to “REPLACE TONER BAG SYMBOL” in Operator’s 

Manual for Basic Function.

y

Paper Empty

The Out of Paper error icon shows which drawer is empty: upper, middle, or lower. A paper 

out condition does not necessarily terminate a print or copy job. If Auto-select options are 

configured, printing and copying may continue by drawing paper from a different drawer. 

Refer to the Printer Utility online Help for instructions on setting up Auto-Select mode. For 

information on resolving the error condition, refer to “ADD PAPER SYMBOL” in Operator’s 

Manual for Basic Function.

y

Paper Jam

The Device Status icon varies depending on where a paper jam occurred in the copier. This 

graphic illustrates the possible locations. For information on resolving the error condition, 

refer to “CLEAR PAPER SYMBOL” in Operator’s Manual for Basic Function.

y

Staple Empty

The Add Staples error icon indicates you need to add staples to the finisher. For information 

on resolving the error condition, refer to “ADDING STAPLES (OPTIONAL)” in Operator’s 

Manual for Basic Function.

y

Serviceman Calls

The Service Call error icon indicates that a call for service is needed. Contact your service 

representative.