Oce im2330 Network Administration Manual - page 29

Setting up NetWare Print Server    27

y

The Novell iManager must be installed.

For more information to install the Novell iManager, please see the documentation for the 

Novell iManager that is provided by Novell, Inc.

In order to set up the iPrint system, the network administrator must do the following:

1. Installing iPrint

 P.27 “Installing iPrint”

2. Enabling the DNS on the Printer Services Manager

 P.27 “Enabling DNS on the Printer Services Manager”

3. Enabling iPrint service

 P.27 “Enabling iPrint Service”

Installing iPrint

1

Click [Novell] in the GUI screen of NetWare and select [Install].

2

Click [Add].

If the iPrint/NDPS is displayed in the list, iPrint has already been installed during the 

installation of NetWare.  In that case, you do not have to operate the installation for iPrint.

3

Insert the NetWare Operating System CD-ROM into your CD-ROM 

drive.

4

Select the “PRODUCT.Nl” file that is located in the root of the CD-

ROM, and click [OK].

5

Follow the prompts to install iPrint/NDPS.

Enabling DNS on the Printer Services Manager

Before enabling DNS for the Printer Services Manager, you should add the DNS name for the 

Printer Services Manager to the DNS server.

After you add the DNS to the DNS server, follow the steps below to enable the DNS on the 

Printer Services Manager.

1

At the server console, enter the following syntax.

NDPSM /dnsname=

Enabling iPrint Service

After enabling DNS on the Printer Services Manager, enable the iPrint Service using the iMan-

ager.