Oce im2330 Network Administration Manual - page 28

1 Setting up Network Server

26    Setting up NetWare Print Server

2

Select the printer drivers to be automatically downloaded to users’ 

workstations when they select the new Printer Agent.

3

Select all desired drivers and then click [Continue].

A message box opens, listing the selected drivers:

4

Click [OK] if the selections are correct or click [Cancel] to return to 

the Select Printer Drivers dialog and modify your selections.

NDPS Printer Agent setup is complete. The new Printer Agent now appears in the list of 

NDPS objects.

— Removing NDPS Components

1

Use the NWADMIN utility to delete all Océ  NDPS printer and print 

agents you created.

2

Delete the following files using either Windows Explorer or MS-DOS 

operating system commands. Check that the files are not in use 

before deleting them.

SYS:\SYSTEM\TAGATE.NLM

SYS:\SYSTEM\TAPAP.NLM

SYS:\SYSTEM\TACON.NLM

SYS:\SYSTEM\TALIB.NLM

SYS:\SYSTEM\TACFG.PD0

SYS:\SYSTEM\NLS\4\TAGATE.MSG

SYS:\SYSTEM\NLS\4\TACON.MSG

SYS:\SYSTEM\NLS\4\TALIB.MSG

SYS:\SYSTEM\NLS\4\TACFG.MSG

SYS:\SYSTEM\NLS\4\TAPAP.MSG

SYS:\SYSTEM\NLS\4\TACFG.HLP

SYS:\SYSTEM\NLS\4\TACON.HLP

SYS:\SYSTEM\NLS\4\TALIB.HLP

SYS:\PUBLIC\WIN32\TASNAPIN.PC2

SYS:\PUBLIC\WIN32\TACFG.PD2

SYS:\PUBLIC\WIN32\Oce.INI

SYS:\PUBLIC\WIN32\TASNMP.DLL

SYS:\PUBLIC\WIN32\NLS\ENGLISH\TARES.DLL

SYS:\PUBLIC\WIN32\NLS\ENGLISH\TACFGRES.DLL

SYS:\PUBLIC\WIN32\NLS\ENGLISH\SC2_MSG.DLL

SYS:\PUBLIC\WIN32\NLS\ENGLISH\HLP25632.DLL

SYS:\PUBLIC\WIN32\NLS\ENGLISH\ROBOEX32.DLL

SYS:\PUBLIC\WIN32\NLS\ENGLISH\SC3_MSG.DLL

Setting up the NetWare in iPrint Mode

This equipment also supports the Novell iPrint.

Using the iPrint system, you can set up the printer that can be accessed using URL from client 

computers.  The iPrint system is based on the NDPS architecture so that you must have NDPS 

installed and configured in the NetWare 6.0/6.5 server.

Before configuring the NetWare file server in NDPS mode, please confirm followings:

y

The NDPS Broker, NDPS Manager, and NDPS Printer must be created.

 P.18 “Setting up the NDPS with NetWare Administrator”