Odyssey LI-COR Operator's Manual - Setting Date and Time
of
132
107
All scan files stored on the Odyssey
®
hard disk have a date-time
stamp that identifies when the files were created. The
Set System
Time
link on the Utilities page is used to set the clock in the Odyssey
Imager. A backup battery maintains the clock when power is discon-
nected, so it is generally only necessary to set the clock when the
Odyssey Imager is first installed.
Important:
Check instrument status before setting date and time. Setting the clock
during a scan will abort the scan.
Setting Date and Time
Enter
Date
and
Time
, and
click
Set Time
.