Odyssey LI-COR Operator's Manual - Overview
11
The Odyssey
®
Imager is a network server device that is connected to
a network, and ultimately to a computer, via TCP/IP. This allows
access to the Odyssey Imager via the Odyssey Application Software
or an Internet browser. The Odyssey Imager can also be connected
directly to the computer in stand-alone (non-network) configurations.
Image data, run parameters, and security protocols can be viewed
and/or changed over the network; finished scans are then
downloaded from the Odyssey hard disk to local drives for storage
and analysis.
Note:
Although the Odyssey Imager has an internal hard disk, it should be used for
temporary storage only; when the hard disk is full, the oldest files are overwritten to
make space.
Files can also be erased from the hard disk using the browser
interface; see Chapter 5,
Viewing and Deleting Scans Within a Scan
Group
.
Unique, password-protected User Accounts allow access rights to be
established for multiple users.
Overview
Chapter 2: Overview and General